Single Dual Audio Channels 8 Zone Expander with 8 Dry Contact Outputs for Speaker/Loudspeaker/AMP

• Customization: Available
• Type: Voicewell Pava System
• PAR Ameters: Values
• Model NO.: PA-ZONE8
• Main Power Supply Fuse: T2al 250V
• R Ated Power: 35W
• Input Signal: 1V(0dbv)
• Fr Equency Response: 80Hz-18kHz, ± 3dB
• Output Signal: 1V (0dbv)
• Channel No.: 3 (CH1, CH2 and Spare Amplifier)
• Contact Inputs: 8 Monitored Dry Contact Inputs
• Product Dimension (W*H*D): 482 mm × 88 mm × 407 mm
• Package Dimension (W*H*D): 580mm × 235mm × 552mm
• Gross Weight: 10.3kg
• Output Channel No.: 8(with Group a and Group B)
• Thd: <0.1%
• Input Impedance: 10 KΩ
• Output Channels: CH1, CH2
• Transport Package: Gift Box/ Export Carton/ Pallet
• Specification: 280× 62× 185 mm
• Trademark: Lucky Tone or OEM
• Origin: China
• HS Code: 8518900090
• Production Capacity: 500000PCS Per Year

Product Description

 

Description:

PA-ZONE8&PV-ZONE8 is the zone extension device to expand the number of loudspeaker lines and interfaces. ZONE8 can provide the interfaces for 16 loudspeaker lines (corresponding to 8 zones), 8 dry contact inputs and 8 dry contacts. External power amplifiers must be connected to drive all the loudspeakers.

Features:

>Supports single and dual audio channels.

>Maximum 8 zones can be connected, each zone has two speaker lines (A and B), of which maximum power rate is 500W

>8 dry contact inputs with supervision

>8 dry contact outputs

>4 external power amplififiers and 1 spare power amplififier can be connected

>Flexible amplififier redundancy function

>Full supervision, including main power supply, backup power supply, CPU fault, power amplififier, speaker lines, dry contact

inputs and network fault, etc.

>Speaker line supervision in both broadcasting and non-broadcasting mode.

>The volume of the signal to amplififiers can be set via MCU

>Supports 3-wire and 4-wire volume controller

>Supports standalone mode and networking mode 1 line input interface, which can be connected to external device when device is in standalone mode or the CPU of MCU fails

>DC power output interface, through which to supply power for external modules, such as volume controller

>Maximum 15 PA-ZONE8 or PV-ZONE8 can be used.
 

SPECIFICATIONS	PA-ZONE8
PAR AMETERS	VALUES
MAIN POWER SUPPLY FUSE	T2AL 250V
R ATED POWER	35W
INPUT SIGNAL	1V(0dBV)
SNR	>80dB, A-weighted
OUTPUT SIGNAL	1V (0dBV)
THD	<0.1%
CHANNEL NO	3 (CH1, CH2 and spare amplififier)
OUTPUT SIGNAL	1.4V
OUTPUT CHANNEL NO	8(with group A and group B)
MAXIMUM LOUDSPEAKER LOAD	500W
CONTACT INPUTS	8 monitored dry contact inputs
HUMIDITY	< 95%, without condensing
NET WEIGHT	7.5Kg