Built-in Lavoce Italy Driver 6.5 Inch Coaxial Multifunctional Dante Wall Speaker with DSP, Poe Power Supply and Over-Current Protection

• Customization: Available
• Amplification Type: Active
• Speaker Material: Metal
• Model NO.: DP 90 DSP
• Sound Channel: 1
• Structure: Closed Enclosure
• SNR: >100dB
• Input Interface: Rj-45
• Audio Input Signal: Dante™ Balanced Amplified Signal
• Frequency Response: 70Hz~18kHz
• Sensitivity(1m/1W): 91dB
• Power Rating: 90W
• Speaker Driver: Lavoce Italy Driver 6.5 Inch Coaxial
• Net Weight: 6kg
• Product Dimensions: (Height)305 X (Width)245 X (Depth)235mm
• Transport Package: Gift Box/ Export Carton/ Pallet
• Specification: (Height)305 x (Width)245 x (Depth)235mm
• Trademark: Lucky Tone or OEM
• Origin: China
• HS Code: 8518290000
• Production Capacity: 500000PCS Per Year
• Package Size: 90.00cm * 90.00cm * 100.00cm
• Package Gross Weight: 6.000kg

Product Description

Built-in Lavoce Italy Driver 6.5 Inch Coaxial Multifunctional Dante Wall Speaker with DSP, POE Power Supply and Over-current Protection

 

Description:

DP 90 DSP Speaker can realize its multifunction the POE power supply, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. DP 90 DSP adopts SSA inverter technology allowing that the high-quality enlargement of superior sound quality realizes on this compact speaker of low power design. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz) and its control signal can be routed through the Dante™ Controller. DP 90 DSP integrates versatile functions like gain control, mute control, 5-band equalizer control and DSP with limit control. All these functions can perform remotely on the PC by DSP Controller Software.

 

Features:

1. Built-in Dante module
2. Built-in power amplifier module and its system efficiency > 70%
3. DSP controlling software
4. PoE power supply
5. Over-current protection, Thermal protection and Overload protection

 

MODEL	DP 90 DSP
Type	Speaker with DSP and Dante
Input Interface	RJ-45
Audio Input Signal	Dante™ | Balanced amplified signal
Cable	Cat-5 or above
Output Power	90W, POE boost up to 60W depends on router power
Bandwidth	100M/1000M bps
Frequency Range	70Hz-18KHz(±3dB)
Driver	Lavoce Italy driver 6.5 inch coaxial
Sensitivity	91dB (1w/1m)
Max. SPL	117dB(continuous)
Total Harmonic Distortion	<0.30%
Signal to Noise Ratio	>100dB
Noise Floor	<200uV
System Efficiency	>70%
Protective Circuitry	Over-current protection, Thermal protection, Overload protection.
Cooler	Natural convection cooling
Dimension	(Height)305 x (Width)245 x (Depth)235mm
Package	(Height)369 x (Width)581 x (Depth)296mm
Net Weight	6kg